Model LP-1000-6000 1000-6000MHz 8 dBi Gain 
 

MIL-STD LOG PERIODIC DIPOLE ANTENNA

Design Features : The LP-1000-6000 high performance log periodic dipole antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminium alloy with welded elements. The complete antenna is supplied with powder coating finish to protect it further from severe environment conditions. The LP-1000-6000 log periodic dipole antenna is designed to provide wideband directional transmission/reception of radio signals from 1000 to 6000MHz bands. The extra spacers are used between the support booms to improve mechanical durability of antenna. This high power high gain log periodic dipole antenna provides strong performance over the entire frequency of 1000-6000MHz as the LPDA does not use loading technique to reduce the overall size of array. Powder coating of the complete log periodic antenna provides extra protection against corrosion in saline weather present in coastal areas.
Constructions : The high-performance log periodic dipole antenna is supplied complete in assembled condition. The LP-1000-6000 assembled high power log periodic antennas outer-most dimensions are 450mm long and 250mm wide. The compact size of the log periodic antenna allows easy handling and specially designed mounting arrangement results in fast installation. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and for immunity to noise. Output of log periodic antenna is provided via low loss coaxial cable whose N-Female termination is fixed at the back end of the antenna mounting plate All the screws, nuts and bolts of log periodic dipole antenna are made of stainless steel.

Electrical Specifications:
Frequency Range1000-6000MHz
Gain8 dBi
Bandwidth1000-6000 MHz
PolarizationHorizontal or Vertical
Input Impedance50 Ohms
Radiation PatternDirectional
Beamwidth -3dB.60+/-5 Degrees Typical
Front to Back Ratio17+/-2 dB. Typical
VSWR - Equal To or Better ThenLess Than 2.5:1
RF Power Handling Capacity100 Watts @ 6GHz
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
Antenna MaterialsAluminum, Fiberglass, SS
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length450 mm
Shipping Length550 mm
Support Boom -
Material - O.D.
6063T6 Aluminum
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
6063T6 Aluminum
Round Rod
Mounting Clamps PositionRear End of Antenna
Maximum Mount Pipe Diameter 51mm (2 Inches)
Radome MaterialHigh Strength Fiberglass
Gross Weight2.5 Kgs. Approx

Environmental Specifications:
Operating Temperature(-)30 to +70 Degrees Celsius
Storage Temperature(-)40 to +80 Degrees Celsius
Humidity0 to 95% RH