Click here to visit the Home Page of Antenna Experts
Click here to visit the Home Page of Antenna Experts
 Model APT-4734 4400-5000 MHz 33.5dBi Gain 


Design Features:The APT-4734 tactical microwave grid parabolic antenna consists of full Parabolic reflector having a diameter of 1.6 Meters for use in all tactical and fixed station applications for conventional radio relay systems. The antenna covers full NATO band IV, operates in linear polarization and requires two operators for installation. The antenna features a rare combination of high gain low side lobes and a rugged construction. APT-4734 is perfect for use in crowded electromagnetic spectrums which avoid interference from co-sited antenna. The mounting arrangement of Tactical Antenna permits to change the polarization from horizontal to vertical and vice-versa by mounting hardware fitted at rear end of the antenna. The antenna is supplied with +/-5 degrees elevation tracking mechanism.

Constructions: The APT-4734 uses 6063T6 ultra corrosion resistant architectural anodized aluminium alloy and supplied with powder coating finish in order to prevent it further from sever environmental condition. The tactical microwave antenna operates in the 4400-5000MHz. frequency band and can be installed at vertical erected mast. The parabolic reflector is illuminated by a primary feed which is fitted to the center of assembly with quick fastener system. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of tactical microwave antenna are of marine grade stainless steel. The antenna supplied with olive army green color.

Electrical Specifications:
Frequency Range4400-5000 MHz
BandwidthNATO Band IV
PolarizationHorizontal or Vertical
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points3 Degrees
Front to Back Ratio32 dB.
VSWR - Equal To or Better Then2:1
RF Power Handling Capacity100 Watts
Input TerminationN-Female

Mechanical Specifications:
Antenna Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating160 Km/Hr.
Diameter of Parabolic Reflector1.6 Meters (5.3 feet)
Radiating MaterialHigh Quality Brass
Reflector Grid Material Aluminum Tube 12.7mm
Support & Rim MaterialAluminum Tube 25.4mm
Maximum Mount Pipe Diameter 38-60 mm (1.5-2.25Inches)
Gross Weight22 Kgs.

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH