Click here to visit the Home Page of Antenna Experts
Click here to visit the Home Page of Antenna Experts
 
 Model AH-2733 2700-3300MHz 15 dBic Gain 
 

HIGH GAIN HELICAL ANTENNA

Design Features:The AH-2733 uses extended stubs to provide the greater gain while maintaining the wider beam-width. This high-gain low-profile antennas use Circular Polarization Antenna Technology - which delivers better penetration through obstruction and interference. This commercial grade antenna provides superior performance as compare to significantly larger and more expensive products. Our AH series helical antennas are smaller than conventional yagi antenna. The AH-2733 Helical Antenna is supplied with a specially designed mounting arrangement for steering the antenna in both planes, over 360 Degrees in Azimuth and 90 Degrees in Elevation for terrestrial and satellite links.

Constructions: The AH-2733, like all our AH series helical antennas, utilizes circular polarization to minimize the effects of multipath interference. Both Right Hand Circular Polarized (RHCP) and Left Hand Circular Polarized (LHCP) helical antenna models are available. The AH-2733 Helical Antenna is light weight, broadband and rugged helical antennas, supplied with fiberglass radome to protect the antenna from environment. Cylindrical enclosure is used for low wind loading and for minimal effect of ice formation on the helical antenna operation as well as providing an aesthetically pleasing appearance.

Array Formation: For higher gain requirement, the Helical antenna can be supplied in DUAL stacked or QUAD stacked arrays with suitable power splitter/combiner cable harness.

Electrical Specifications:
Frequency Range2700-3300MHz
Gain15 dBic
Bandwidth2.7-3.3GHz
Antenna TypeHelix
PolarizationCircular LHCP or RHCP
Input Impedance50 Ohms
Radiation PatternDirectional
Front to Back Ratio18 dB.
VSWR - Equal To or Better Then1.5:1
RF Power Handling Capacity100 Watts (500W Optional)
Input TerminationN-Female

Mechanical Specifications:
Antenna MaterialsHigh Quality Copper, Aluminum & Fiberglass
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length300 mm
Shipping Length350 mm
Radiating MaterialHigh Quality Copper
Maximum Mount Pipe Diameter 52mm (2 Inches)
Radome MaterialHigh Strength Fiber Glass
Radome Outer Diameter45 mm
Gross Weight1.5 Kgs.

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH