Click here to visit the Home Page of Antenna Experts
Click here to visit the Home Page of Antenna Experts
 
 Model HFCM-4-30 4-30 MHz 5 dBi Gain 
 

HF BROADBAND CONICAL MONOPOLE ANTENNA

The HFCM-4-30 conical monopole antenna is an excellent choice for omnidirectional HF communications where both ground wave and sky wave coverage are required. The electrical performance of HFCM-4-30 HF conical monopole antenna is nearly similar to the theoretical performance. Due to its large diameter/height ratio the HF vertical conical monopole has excellent VSWR and pattern performance over a very wide frequency range, as compared to other conical monopoles manufacturers. HF vertical conical monopole antenna operates at full efficiency over the 4-24 MHz bands.

The true wideband capabilities of the HF conical monopole are achieved with full radiation efficiency. The HFCM-4-30 HF conical monopole antenna uses no tuners, no special coupling units, no terminations, no resistors to achieve its high bandwidth, nor does these uses any techniques or devices to couple RF energy to the ground, an approach sometimes used to increase bandwidth. The HFCM-4-30 HF vertical conical monopole is the simplest and safest antennas to erect in its class. The structure of HF conical monopoles above 10 MHz is fully stable during the rigging sequence, with guys. Once erected, the HFCM-4-30 HF monopoles antennas have outstanding structural rigidity, troublesome deflections and mechanical oscillations do not occur.

All HFCM-4-30 HF conical monopole antenna uses high quality, exhaustively tested components and materials. All radiators are of Alumoweld, a wire composed of a high-strength steel core and a highly conductive, corrosion-resistant coating of aluminum. All insulators are made of high-strength DELRIN, a material with an extremely low loss tangent that is virtually impervious to the effects of UV and salt spray. All nuts, bolts, split washers and fasteners are made of marine grade stainless steel. Dissimilar metal contacts are avoided to the extent possible, and where they are used, measures are taken to prevent corrosion.

Electrical Specifications:
Frequency Range4-30 MHz
Gain5 dBi
Bandwidth4-30 MHz
PolarizationVertical
Input Impedance50 Ohms
Horizontal Beamwidth -Half Power PointsOmni
VSWR - Equal To or Better Then1:3

Mechanical Specifications:

Environmental Specifications:
Operating Temperature(-)30 to + 70 Degrees Celsius
Storage Temperature(-)30 to + 80 Degrees Celsius
Humidity0 to 95% RH