Click here to visit the Home Page of Antenna Experts
Click here to visit the Home Page of Antenna Experts
 Model LP-30-300 30-300 MHz 9 dBi Gain 


Design Features: The LP-30-300 log periodic dipole antenna use 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and designed to provide wideband directional transmission/reception of radio signals from 30-300 MHz bands. The specially designed mounting arrangement results in fast installation. The extra spacers are used between the support booms to improve mechanical durability of log periodic antenna. The antenna can be assembled in less than 10 minutes. This log periodic dipole antenna system is particular suitable for transmission, reception, monitoring, scanning and jamming applications due to its broad band design feature. This high gain LPA provides strong performance over the entire frequency of 30-300 MHz as the LPDA does not use loading technique to reduce the overall size of array.

Constructions: The LP-30-300 assembled log periodic antennas outer-most dimensions are 4.8 meters (15.8 feet) long and 5 meters (16.5 feet) wide. The antenna has foldable elements, the longest of which is 2.5 meters. All elements are supplied in two segments for easy of shipping and handling. The elements are attached via a fast deployment stainless steel studs & nuts system at points along the boom. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. The complete antenna is supplied with powder coating finish to protect it further from severe environmental conditions All the screws, nuts and bolts of log periodic dipole antenna are made of type 316 marine grade stainless steel. The mounting arrangement of log periodic antenna permits to change the polarization from horizontal to vertical and vice-versa.

Electrical Specifications:
Frequency Range30-300 MHz
Gain9 dBi
BandwidthEntire Band
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points90 +/-10 Degrees
Front to Back Ratio16 +/-1 Degrees
VSWR - Equal To or Better Then1:3
RF Power Handling Capacity1000 Watts
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
Antenna Materials6063T6 Aluminum
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating180 Km/Hr.
Overall Length4.8 Meters
Shipping Length2.5 Meters
Support Boom -
Material - O.D.
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Round Tube
Insulator MaterialDelrin & Nylon
Maximum Mount Pipe Diameter 50-76mm (2-3 Inches)
Gross Weight30 Kgs.

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95% RH