Click here to visit the Home Page of Antenna Experts
Click here to visit the Home Page of Antenna Experts
 Model LP-1000-3000 1000-3000MHz 9 dBi Gain 


Design Features: The LP-1000-3000 log periodic dipole antenna is designed to provide wideband directional transmission/reception of radio signals from 1000 to 3000MHz bands. The compact size of the log periodic antenna allows easy handling and specially designed mounting arrangement results in fast installation. The extra spacers are used between the support booms to improve mechanical durability of antenna. The log periodic dipole antenna is supplied complete in assembled condition. This high gain LPA provides strong performance over the entire frequency of 1000-3000MHz as the LPDA does not use loading technique to reduce the overall size of array.

Constructions : The high gain log periodic dipole antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminum alloy with powder coating finish to protect the antenna further from severe environmental condition. The LP-1000-3000 assembled log periodic antennas outer-most dimensions are 0.4 meter (16 Inches) long and 0.15 meter (6 Inches) wide. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and for immunity to noise. Output of log periodic antenna is provided via low loss coaxial cable at the back end of the antenna boom. All the screws, nuts and bolts of log periodic dipole antenna are made of stainless steel. Optional: The antenna can be supplied with fiber glass radome/enclosure.

Electrical Specifications:
Frequency Range1000-3000MHz
Gain9 dBi
BandwidthEntire Band
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Horizontal Beamwidth -Half Power Points60+/-5 Degrees
Front to Back Ratio18+/-2 dB. Typical
VSWR - Equal To or Better Then2.5:1
RF Power Handling Capacity150 Watts , 500W Optional
Input TerminationN-Female
Lightning ProtectionDC Ground

Mechanical Specifications:
Antenna Materials6063T6 Aluminum Alloy
Mounting Hardware -MaterialsMarine Grade Stainless Steel
Wind Rating200 Km/Hr.
Overall Length450 mm
Shipping Length420 mm
Support Boom -
Material - O.D.
Square Tube
Elements - Materials
- Cross Section - Outer Diameter
Round Rod
Insulator MaterialTeflon & Nylon
Maximum Mount Pipe Diameter 52 mm (2 Inches)
Radome MaterialHigh Strength Fiberglass
Gross Weight< 3.0 Kgs

Environmental Specifications:
Operating Temperature(-)30 to +70 Degrees Celsius
Storage Temperature(-)40 to +80 Degrees Celsius
Humidity0 to 95% RH