 |
|
||||||||||||
HIGH GAIN STACKED DIPOLE ARRAY
Design Features:The SD3-150 high performance VHF stacked dipole array is designed for use with highly populated radio sites requiring long haul omni directional coverage. The SD3-150 is heavy duty stacked dipole array features, wide bandwidth, high gain, high power handling capacity, low VSWR, low noise performance and null filling coverage with omni directional characteristics. This stacked dipole array is highly suitable as base station antennas for Repeater and Paging sites.
Constructions: The SD3-150 Stacked Dipole Array consists of two folded dipoles stacked vertically. This Stacked Dipole Antenna operates at D.C. ground for protection against lightning. N-Female connector of phasing harness cable sealed in heat shrinking tube making stacked dipole antenna waterproofing. The 3.65 Meters long central mast for mounting the dipoles shipped in two sections of 1.8 Meters each for easy of shipping.
| Electrical Specifications: | |
| Frequency Range | 136 - 174 MHz. |
| Gain | 3 dBd. |
| Bandwidth | 10 MHz. |
| Polarization | Vertical |
| Input Impedance | 50 Ohms. |
| Radiation Pattern | Omni-Directional |
| Beamwidth -3dB. | 36 Degrees (Vertical) |
| VSWR | 1.5 : 1 |
| RF Power Handling Capacity | 250 Watts |
| Input Termination | N-Female |
| Lightning Protection | Direct Ground |
| Mechanical Specifications: | |
| Materials | Aluminum |
| Mounting Hardware -Materials | Stainless Steel |
| Wind Rating | 210 Km/Hr. |
| Overall Length | 3.65 |
| Support Pipe Aluminum - Outer Diameter. | 50 mm |
| Dipoles Aluminum - O.D. | 12.7 mm |
| Shipping Length | 1.8 Meters |
| Support Pipe O.D. | 51mm |
| Support Pipe Material | Aluminum |
| Maximum Mount Pipe Diameter | 52 mm (2 Inches) |
| Gross Weight | 8 Kgs. |
| Environmental Specifications: | |
| Operating Temperature | (-)30 to +70 Degrees Celsius |
| Storage Temperature | (-)40 to +80 Degrees Celsius |
| Humidity | 0 to 95% RH |