Model: AP-145019 1300-1600 MHz 19 dBi. Gain 
 

GRID PARABOLIC ANTENNA

Design Features: The AP-145019 grid parabolic antenna consists of full Parabolic reflector having a diameter of 0.9 Meter for use in point-to-point analogue and digital communication systems. The mounting arrangement of grid parabolic Antenna permits to change the polarization from horizontal to vertical and vice-versa.

Constructions: Radiating elements and the dipole feed are made of high quality brass. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of grid parabolic antenna are of stainless steel.

Tracking Mechanism: The AP-145019 grid parabolic antenna supplied with elevation tracking mechanism where fine adjustments is necessary to optimize the signal strength of radio link.

Electrical Specifications:
Frequency Range1300-1600 MHz
Gain19 dBi.
Bandwidth150 MHz.
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Beamwidth -3dB.16 Degrees
Front to Back Ratio23 dB.
VSWR1:1.5
RF Power Handling Capacity250 Watts
Input TerminationN-Female
Lightning ProtectionDirect Ground

Mechanical Specifications:
MaterialsAll Aluminum
Mounting Hardware -MaterialsStainless Steel
Weight10 Kgs.
Wind Rating200 Km/Hr.
Support Pipe O.D.25.4 mm (1 Inch)
Support Pipe MaterialAluminum
Diameter of Parabolic Reflector0.9 Meter
Radiating MaterialAll Brass
Reflector Grid Material Aluminum Tube 12.4 mm (1/2 Inch)
Support & Rim MaterialAluminum Tube 1 Inch 3 mm wall
Maximum Mount Pipe Diameter 52 mm (2 Inches)

Environmental Specifications:
Operating Temperature(-)30 to +70 Degrees Celsius
Storage Temperature(-)40 to +80 Degrees Celsius
Humidity0-95% RH